Jetsprint

From Wikipedia, the free encyclopedia
(Redirected from Jet Sprint Boat racing)

Jetsprint or sprint boat racing[1] is a form of motorboat racing in which jetboats, with a crew of two, race individually against the clock through a twisting series of channels in less than a metre of water.[2]

Tracks are typically designed for spectators, and racing is fast and loud, with boat motors usually powered by V8s developing well over 500 hp.[3]

History[edit]

Jetsprinting as an organised sport originated in New Zealand in 1981, and events were originally held in the same natural braided rivers that had inspired Sir William Hamilton to develop the jetboat, but when the sport was introduced to Australia in the mid-1980s, permanent artificial courses were used—and this is now the norm even in New Zealand.

There is now a world championship under the auspices of the Union Internationale Motonautique,[4] with hosting rotating between New Zealand, Australia and the U.S.A.

Format[edit]

The race itself consists of a predefined course through the channels with 25 to 30 changes of direction. These races generally take just 45–60 seconds. Once qualifying is completed, the competitors each run the course with the fastest qualifiers running last. The fastest 16 (typically depending on the number of competitions) proceed to the next round. This is then reduced to the top 12, Top 8 then the top 5 and finally the fastest three.

Boats[edit]

A jetsprint hull is typically short - just 3.8 to 4.0 metres (12½ to 13 feet) long. The hull's vee is usually 23 to 25 degrees with several strakes on each side. A short hull is preferred, as a longer hull takes more distance to turn and usually must be turned at a slower speed. The strakes provide "traction' by stopping the boat from sliding sideways across the water when turning at high speed.

A rollcage must be fitted to the boat.

Crew[edit]

A crew consists of the driver and a navigator, whose responsibility is to guide the driver through the course - typically via simple hand signals, pointing the hand in the direction that the boat must go at the next intersection.

Classes[edit]

There are two internationally recognised classes

Group A - engines in Group A boats are restricted to either 6.7-litre (412 cubic inch) engines with cast iron blocks and heads, or 6-litre (365 cubic inch) engines with aluminium heads. Both engines are only allowed two push-rod operated valves per cylinder. Furthermore, the engine must be normally aspirated, using a four-barrel carburetor. Fuel is 100+ octane aviation fuel. Typically these engines produce up to 650 horsepower

Super Boats - engines in the Super Boat class have no maximum size, but instead have a minimum size restriction. Normally aspirated engines must have a displacement of 6.5 litres (400 cubic inches), while forced induction (turbocharged or supercharged) engines must be at least 3.8 liters (235 cubic inches) in displacement. These engines typically are fuel injected and run methanol fuel. The small-block engines typically produce 950+ horsepower, while the big blocks can produce between 1000 and 1600 horsepower.

Nitromethane and nitrous oxide are not allowed.

See also[edit]

External links[edit]

References[edit]

  1. ^ DeFord, Jim; Schlagel, Jeff. "What is Sprint Boat Racing?". USSBA Racing Series History. USSBA Racing Series. Archived from the original on 8 December 2013. [...] Sprint Boat racing, or Jet Sprinting as it's known in its founding country of New Zealand [...]
  2. ^ "Racing Format". New Zealand JetSprint Association. Archived from the original on 26 April 2012.
  3. ^ "International Group A Class". New Zealand JetSprint Association. Archived from the original on 26 April 2012.
  4. ^ "Jetsprint". UIM Powerboating. Union Internationale Motonautique. Archived from the original on 28 November 2015.