Approval voting

From Wikipedia, the free encyclopedia
On an approval ballot, the voter can select any number of candidates.

Approval voting is an electoral system in which voters can select any number of candidates instead of selecting only one.

Description[edit]

Approval voting ballots show a list of all the candidates running and each voter indicates support for as many candidates as they see fit. Final tallies show how many votes each candidate received, and the winner is the candidate with the most support.

Effect on elections[edit]

Approval voting advocates Steven Brams and Dudley R. Herschbach predict that Approval should increase voter participation, prevent minor-party candidates from being spoilers, and reduce negative campaigning.[1] One study showed that Approval would not have chosen the same two winners as plurality voting (Chirac and Le Pen) in the first round of the 2002 French presidential election; it instead would have chosen Chirac and Jospin as the top two candidates to proceed to the runoff.

In the actual election, Le Pen lost by an overwhelming margin in the runoff, 82.2% to 17.8%, a sign that the true top two candidates had not been found. In the approval voting survey primary, Chirac took first place with 36.7%, compared to Jospin at 32.9%. Le Pen, in that study, received 25.1% and so would not have made the cut to the second round. In the real primary election, the top three were Chirac, 19.9%, Le Pen, 16.9%, and Jospin, 16.2%.[2] A study of various "evaluative voting" methods (Approval and score voting) during the 2012 French presidential election showed that "unifying" candidates tended to do better, and polarizing candidates did worse, as compared to under plurality voting.[3]

A generalized version of the Burr dilemma applies to Approval when two candidates are appealing to the same subset of voters. Although Approval differs from the voting system used in the Burr dilemma, Approval can still leave candidates and voters with the generalized dilemma of whether to compete or cooperate.[4][5] But, Approval satisfies the favorite betrayal criterion, which means that it is always safe for a voter to give their true favorite maximum support.

While in the modern era there have been relatively few competitive Approval elections where tactical voting is more likely, Brams argues that Approval usually elects Condorcet winners in practice.[6][7]

Operational impacts[edit]

  • Simple to tally—Approval ballots can be counted by some existing machines designed for plurality elections, as ballots are cast, so that final tallies are immediately available after the election, with relatively few if any upgrades to equipment.
  • Just one round—Approval can remove the need for multiple rounds of voting, such as a primary or a run-off, simplifying the election process.
  • Avoids Overvotes—Approval voting does not have the notion of overvotes, where voting for one more than allowed will cancel the entire opportunity to vote. In plurality elections, overvotes have to be reviewed and resolved if possible while in approval voting, no time is wasted on this activity.

Usage[edit]

Current[edit]

The Latvian parliament uses approval voting within open list proportional representation.[8]

In 2018, Fargo, North Dakota, passed a local ballot initiative adopting Approval for the city's local elections, and it was used to elect officials in June 2020, becoming the first United States city and jurisdiction to adopt Approval.[9][10][11]

In November 2020, St. Louis, Missouri, passed Proposition D to authorize a variant of Approval (as unified primary) for municipal offices.[12][13][14]

History[edit]

Rows of secret approval vote boxes from early 1900s Greece, where the voter drops a marble to the right or left of the box, through a tube, one for each candidate standing

Robert J. Weber coined the term "Approval Voting" in 1971.[15] It was more fully published in 1978 by political scientist Steven Brams and mathematician Peter Fishburn.[16]

Historically, several voting methods that incorporate aspects of Approval have been used:

  • Approval was used for papal conclaves between 1294 and 1621, with an average of about forty cardinals engaging in repeated rounds of voting until one candidate was listed on at least two-thirds of ballots.[17]
  • In the 13th through 18th centuries, the Republic of Venice elected the Doge of Venice using a multi-stage process that featured random selection and voting that allowed approval of multiple candidates and required a supermajority.[18][19]
  • According to Steven J. Brams, Approval was used for unspecified elections in 19th century England.[20]
  • The selection of the Secretary-General of the United Nations has involved "straw poll" rounds of approval polling to help discover and build a consensus before a formal vote is held in the Security Council.[21] The United Nations Secretary-General selection, 2006 indicated that South Korean Foreign Minister Ban Ki-moon was the only candidate to be acceptable to all five permanent members of the Security Council, which led to the withdrawal of India's Shashi Tharoor, who had the highest overall approval rate.[22]
  • Approval was used in Greek legislative elections from 1864 to 1923, when it was replaced with proportional representation.[23]
  • Sequential proportional approval voting was used in Swedish elections in the early 20th century, prior to being replaced by party-list proportional representation.

Political organizations and jurisdictions[edit]

Approval has been used in privately administered nomination contests by the Independent Party of Oregon in 2011, 2012, 2014, and 2016. Oregon is a fusion voting state, and the party has cross-nominated legislators and statewide officeholders using this method; its 2016 presidential preference primary did not identify a potential nominee due to no candidate earning more than 32% support.[24][25][26] The party switched to using STAR voting in 2020.[27][28]

It is also used in internal elections by the American Solidarity Party;[29] the Green Parties of Texas[30][31] and Ohio;[32] the Libertarian National Committee;[33] the Libertarian parties of Texas,[34] Colorado,[35][36] Arizona,[37] and New York;[38] the US Modern Whig Party,[39] Alliance 90/The Greens in Germany;[40] and the Czech[41] and German Pirate Party.[42][43]

In 2018, Fargo, North Dakota passed a ballot initiative adopting Approval for local elections, becoming the first U.S. city and jurisdiction to adopt Approval.[9][44] (Previously in 2015, a Fargo city commissioner election had suffered from six-way vote-splitting, resulting in a candidate winning with an unconvincing 22% plurality of the vote[45].)

The first election was held June 9, 2020, selecting two city commissioners, from seven candidates on the ballot.[46] Both winners received over 50% approval, with an average 2.3 approvals per ballot, and 62% of voters supported the change to Approval in a poll.[47] A poll by opponents of Approval was conducted to test whether voters had in fact voted strategically according to the Burr dilemma.[48] They found that 30% of voters who bullet voted did so for strategic reasons, while 57% did so because it was their sincere opinion.[49][50] Fargo's second Approval election took place in June 2022, for mayor and city commission. The incumbent mayor was re-elected from a field of 7 candidates, with an estimated 65% approval, with voters expressing 1.6 approvals per ballot, and the two commissioners were elected from a field of 15 candidates, with 3.1 approvals per ballot.[51][52]

In 2020, St. Louis, Missouri passed an initiative to adopt Approval followed by a top-two runoff (see Unified primary), thus becoming the second U.S. city to adopt Approval and the first to use a variant of it.[13][14] The first such primary was held in March 2021, with voters expressing 1.1 to 1.6 approvals per ballot in races with more than two candidates.[53][54]

Other organizations[edit]

The idea of approval was adopted by X. Hu and Lloyd Shapley in 2003 in studying authority distribution in organizations.[55]

Approval has been adopted by several societies: the Society for Social Choice and Welfare (1992),[56] Mathematical Association of America (1986),[57] the American Mathematical Society,[58] the Institute of Management Sciences (1987) (now the Institute for Operations Research and the Management Sciences),[59] the American Statistical Association (1987),[60] and the Institute of Electrical and Electronics Engineers (1987). The IEEE board in 2002 rescinded its decision to use Approval. IEEE Executive Director Daniel J. Senese stated that Approval was abandoned because "few of our members were using it and it was felt that it was no longer needed."[7] Because none of these associations report results to their members and the public, it is difficult to evaluate Senese's claim and whether it is also true of other associations; Steven Brams' analysis of the 5-candidate 1987 Mathematical Association of America presidential election shows that 79% of voters cast a ballot for one candidate, 16% for 2 candidates, 5% for 3, and 1% for 4, with the winner earning the approval of 1,267 (32%) of 3,924 voters.[7][61]

Approval also can be used in social scenarios as a fairer system compared to a First-Past-The-Post equivalent, being able to avoid a spoiler effect while still being very quick to calculate.

Strategic voting[edit]

Overview[edit]

Approval voting allows voters to select all the candidates whom they consider to be reasonable choices.

Strategic Approval differs from ranked voting (aka preferential voting) methods where voters might reverse the preference order of two options, which if done on a larger scale can cause an unpopular candidate to win. Strategic Approval, with more than two options, involves the voter changing their approval threshold. The voter decides which options to give the same rating, even if they were to have a preference order between them. This leaves a tactical concern any voter has for approving their second-favorite candidate, in the case that there are three or more candidates. Approving their second-favorite means the voter harms their favorite candidate's chance to win. Not approving their second-favorite means the voter helps the candidate they least desire to beat their second-favorite and perhaps win.

Approval allows for bullet voting and compromising, while it is immune to push-over and burying.

Bullet voting occurs when a voter approves only candidate "a" instead of both "a" and "b" for the reason that voting for "b" can cause "a" to lose. The voter would be satisfied with either "a" or "b" but has a moderate preference for "a". Were "b" to win, this hypothetical voter would still be satisfied. If supporters of both "a" and "b" do this, it could cause candidate "c" to win. This creates the "chicken dilemma", as supporters of "a" and "b" are playing chicken as to which will stop strategic voting first, before both of these candidates lose.

Compromising occurs when a voter approves an additional candidate who is otherwise considered unacceptable to the voter to prevent an even worse alternative from winning.

Sincere voting[edit]

Approval experts describe sincere votes as those "... that directly reflect the true preferences of a voter, i.e., that do not report preferences 'falsely.'"[62] They also give a specific definition of a sincere approval vote in terms of the voter's ordinal preferences as being any vote that, if it votes for one candidate, it also votes for any more preferred candidate. This definition allows a sincere vote to treat strictly preferred candidates the same, ensuring that every voter has at least one sincere vote. The definition also allows a sincere vote to treat equally preferred candidates differently. When there are two or more candidates, every voter has at least three sincere approval votes to choose from. Two of those sincere approval votes do not distinguish between any of the candidates: vote for none of the candidates and vote for all of the candidates. When there are three or more candidates, every voter has more than one sincere approval vote that distinguishes between the candidates.

Examples[edit]

Based on the definition above, if there are four candidates, A, B, C, and D, and a voter has a strict preference order, preferring A to B to C to D, then the following are the voter's possible sincere approval votes:

  • vote for A, B, C, and D
  • vote for A, B, and C
  • vote for A and B
  • vote for A
  • vote for no candidates

If the voter instead equally prefers B and C, while A is still the most preferred candidate and D is the least preferred candidate, then all of the above votes are sincere and the following combination is also a sincere vote:

  • vote for A and C

The decision between the above ballots is equivalent to deciding an arbitrary "approval cutoff." All candidates preferred to the cutoff are approved, all candidates less preferred are not approved, and any candidates equal to the cutoff may be approved or not arbitrarily.

Sincere strategy with ordinal preferences[edit]

A sincere voter with multiple options for voting sincerely still has to choose which sincere vote to use. Voting strategy is a way to make that choice, in which case strategic Approval includes sincere voting, rather than being an alternative to it.[63] This differs from other voting systems that typically have a unique sincere vote for a voter.

When there are three or more candidates, the winner of an Approval election can change, depending on which sincere votes are used. In some cases, Approval can sincerely elect any one of the candidates, including a Condorcet winner and a Condorcet loser, without the voter preferences changing. To the extent that electing a Condorcet winner and not electing a Condorcet loser is considered desirable outcomes for a voting system, Approval can be considered vulnerable to sincere, strategic voting.[64] In one sense, conditions where this can happen are robust and are not isolated cases.[65] On the other hand, the variety of possible outcomes has also been portrayed as a virtue of Approval, representing the flexibility and responsiveness of Approval, not just to voter ordinal preferences, but cardinal utilities as well.[66]

Dichotomous preferences[edit]

Approval avoids the issue of multiple sincere votes in special cases when voters have dichotomous preferences. For a voter with dichotomous preferences, Approval is strategy-proof (also known as strategy-free).[67] When all voters have dichotomous preferences and vote the sincere, strategy-proof vote, Approval is guaranteed to elect the Condorcet winner, if one exists.[68] However, having dichotomous preferences when there are three or more candidates is not typical. It is an unlikely situation for all voters to have dichotomous preferences when there are more than a few voters.[63]

Having dichotomous preferences means that a voter has bi-level preferences for the candidates. All of the candidates are divided into two groups such that the voter is indifferent between any two candidates in the same group and any candidate in the top-level group is preferred to any candidate in the bottom-level group.[69] A voter that has strict preferences between three candidates—prefers A to B and B to C—does not have dichotomous preferences.

Being strategy-proof for a voter means that there is a unique way for the voter to vote that is a strategically best way to vote, regardless of how others vote. In Approval, the strategy-proof vote, if it exists, is a sincere vote.[62]

Approval threshold[edit]

Another way to deal with multiple sincere votes is to augment the ordinal preference model with an approval or acceptance threshold. An approval threshold divides all of the candidates into two sets, those the voter approves of and those the voter does not approve of. A voter can approve of more than one candidate and still prefer one approved candidate to another approved candidate. Acceptance thresholds are similar. With such a threshold, a voter simply votes for every candidate that meets or exceeds the threshold.[63]

With threshold voting, it is still possible to not elect the Condorcet winner and instead elect the Condorcet loser when they both exist. However, according to Steven Brams, this represents a strength rather than a weakness of Approval. Without providing specifics, he argues that the pragmatic judgements of voters about which candidates are acceptable should take precedence over the Condorcet criterion and other social choice criteria.[70]

Strategy with cardinal utilities[edit]

Voting strategy under approval is guided by two competing features of Approval. On the one hand, Approval fails the later-no-harm criterion, so voting for a candidate can cause that candidate to win instead of a candidate more preferred by that voter. On the other hand, Approval satisfies the monotonicity criterion, so not voting for a candidate can never help that candidate win, but can cause that candidate to lose to a less preferred candidate. Either way, the voter can risk getting a less preferred election winner. A voter can balance the risk-benefit trade-offs by considering the voter's cardinal utilities, particularly via the von Neumann–Morgenstern utility theorem, and the probabilities of how others vote.

A rational voter model described by Myerson and Weber specifies an Approval strategy that votes for those candidates that have a positive prospective rating.[71] This strategy is optimal in the sense that it maximizes the voter's expected utility, subject to the constraints of the model and provided the number of other voters is sufficiently large.

An optimal approval vote always votes for the most preferred candidate and not for the least preferred candidate. However, an optimal vote can require voting for a candidate and not voting for a more preferred candidate if there 4 candidates or more.[72]

Other strategies are also available and coincide with the optimal strategy in special situations. For example:

  • Vote for the candidates that have above average utility. This strategy coincides with the optimal strategy if the voter thinks that all pairwise ties are equally likely[73]
  • Vote for any candidate that is more preferred than the expected winner and also vote for the expected winner if the expected winner is more preferred than the expected runner-up. This strategy coincides with the optimal strategy if there are three or fewer candidates or if the pivot probability for a tie between the expected winner and expected runner-up is sufficiently large compared to the other pivot probabilities. This strategy, if used by all voters implies at equilibrium the election of the Condorcet winner whenever it exists.[74]
  • Vote for the most preferred candidate only. This strategy coincides with the optimal strategy when there is only one candidate with a positive prospective rating.

Another strategy is to vote for the top half of the candidates, the candidates that have an above-median utility. When the voter thinks that others are balancing their votes randomly and evenly, the strategy maximizes the voter's power or efficacy, meaning that it maximizes the probability that the voter will make a difference in deciding which candidate wins.[75]

Optimal strategic Approval fails to satisfy the Condorcet criterion and can elect a Condorcet loser. Strategic Approval can guarantee electing the Condorcet winner in some special circumstances. For example, if all voters are rational and cast a strategically optimal vote based on a common knowledge of how all the other voters vote except for small-probability, statistically independent errors in recording the votes, then the winner will be the Condorcet winner, if one exists.[76]

Strategy examples[edit]

In the example election described here, assume that the voters in each faction share the following von Neumann–Morgenstern utilities, fitted to the interval between 0 and 100. The utilities are consistent with the rankings given earlier and reflect a strong preference each faction has for choosing its city, compared to weaker preferences for other factors such as the distance to the other cities.

Voter utilities for each candidate city
Fraction of voters (living close to) Candidates Average
Memphis Nashville Chattanooga Knoxville
Memphis (42%) 100 15 10 0 31.25
Nashville (26%) 0 100 20 15 33.75
Chattanooga (15%) 0 15 100 35 37.5
Knoxville (17%) 0 15 40 100 38.75

Using these utilities, voters choose their optimal strategic votes based on what they think the various pivot probabilities are for pairwise ties. In each of the scenarios summarized below, all voters share a common set of pivot probabilities.

Approval Voting results for scenarios using optimal strategic voting
Strategy scenario Winner Runner-up Candidate vote totals
Memphis Nashville Chattanooga Knoxville
Zero-info Memphis Chattanooga 42 26 32 17
Memphis leading Chattanooga Three-way tie 42 58 58 58
Chattanooga leading Knoxville Chattanooga Nashville 42 68 83 17
Chattanooga leading Nashville Nashville Memphis 42 68 32 17
Nashville leading Memphis Nashville Memphis 42 58 32 32

In the first scenario, voters all choose their votes based on the assumption that all pairwise ties are equally likely. As a result, they vote for any candidate with an above-average utility. Most voters vote for only their first choice. Only the Knoxville faction also votes for its second choice, Chattanooga. As a result, the winner is Memphis, the Condorcet loser, with Chattanooga coming in second place. In this scenario, the winner has minority approval (more voters disapproved than approved) and all the others had even less support, reflecting the position that no choice gave an above-average utility to a majority of voters.

In the second scenario, all of the voters expect that Memphis is the likely winner, that Chattanooga is the likely runner-up, and that the pivot probability for a Memphis-Chattanooga tie is much larger than the pivot probabilities of any other pair-wise ties. As a result, each voter votes for any candidate they prefer more than the leading candidate, and also vote for the leading candidate if they prefer that candidate more than the expected runner-up. Each remaining scenario follows a similar pattern of expectations and voting strategies.

In the second scenario, there is a three-way tie for first place. This happens because the expected winner, Memphis, was the Condorcet loser and was also ranked last by any voter that did not rank it first.

Only in the last scenario does the actual winner and runner-up match the expected winner and runner-up. As a result, this can be considered a stable strategic voting scenario. In the language of game theory, this is an "equilibrium." In this scenario, the winner is also the Condorcet winner.

Dichotomous cutoff[edit]

As this voting method is cardinal rather than ordinal, it is possible to model voters in a way that does not simplify to an ordinal method. Modelling voters with a 'dichotomous cutoff' assumes a voter has an immovable approval cutoff, while having meaningful cardinal preferences. This means that rather than voting for their top 3 candidates, or all candidates above the average approval (which may result in their vote changing if one candidate drops out, resulting in a system that does not satisfy IIA), they instead vote for all candidates above a certain approval 'cutoff' that they have decided. This cutoff does not change, regardless of which and how many candidates are running, so when all available alternatives are either above or below the cutoff, the voter votes for all or none of the candidates, despite preferring some over others. This could be imagined to reflect a case where many voters become disenfranchised and apathetic if they see no candidates they approve of. In a case such as this, many voters may have an internal cutoff, and would not simply vote for their top 3, or the above average candidates, although that is not to say that it is necessarily entirely immovable.

For example, in this scenario, voters are voting for candidates with approval above 50% (bold signifies that the voters voted for the candidate):

Proportion of electorate Approval of Candidate A Approval of Candidate B Approval of Candidate C Approval of Candidate D Average approval
25% 90% 60% 40% 10% 50%
35% 10% 90% 60% 40% 50%
30% 40% 10% 90% 60% 50%
10% 60% 40% 10% 90% 50%

C wins with 65% of the voters' approval, beating B with 60%, D with 40% and A with 35%

If voters' threshold for receiving a vote is that the candidate has an above average approval, or they vote for their two most approved of candidates, this is not a dichotomous cutoff, as this can change if candidates drop out. On the other hand, if voters' threshold for receiving a vote is fixed (say 50%), this is a dichotomous cutoff, and satisfies IIA as shown below:

A drops out, candidates voting for above average approval
Proportion of electorate Approval of Candidate A Approval of Candidate B Approval of Candidate C Approval of Candidate D Average approval
25% 60% 40% 10% 37%
35% 90% 60% 40% 63%
30% 10% 90% 60% 53%
10% 40% 10% 90% 47%

B now wins with 60%, beating C with 55% and D with 40%

A drops out, candidates voting for approval > 50%
Proportion of electorate Approval of Candidate A Approval of Candidate B Approval of Candidate C Approval of Candidate D Average approval
25% 60% 40% 10% 37%
35% 90% 60% 40% 63%
30% 10% 90% 60% 53%
10% 40% 10% 90% 47%

With dichotomous cutoff, C still wins.

D drops out, candidates voting for top 2 candidates
Proportion of electorate Approval of Candidate A Approval of Candidate B Approval of Candidate C Approval of Candidate D Average approval
25% 90% 60% 40% 63%
35% 10% 90% 60% 53%
30% 40% 10% 90% 47%
10% 60% 40% 10% 37%

B now wins with 70%, beating C and A with 65%

D drops out, candidates voting for approval > 50%
Proportion of electorate Approval of Candidate A Approval of Candidate B Approval of Candidate C Approval of Candidate D Average approval
25% 90% 60% 40% 63%
35% 10% 90% 60% 53%
30% 40% 10% 90% 47%
10% 60% 40% 10% 37%

With dichotomous cutoff, C still wins.

Compliance with voting system criteria[edit]

Most of the mathematical criteria by which voting systems are compared were formulated for voters with ordinal preferences. In this case, approval voting requires voters to make an additional decision of where to put their approval cutoff (see examples above). Depending on how this decision is made, Approval satisfies different sets of criteria.

There is no ultimate authority on which criteria should be considered, but the following are criteria that many voting theorists accept and consider desirable:

  • Unrestricted domain—A voter may have any preference ordering among the alternatives.
  • Non-dictatorship—There does not exist a single voter whose preference for the alternatives always determines the outcome regardless of other voters' preferences.
  • Pareto efficiency—If every voter prefers candidate A to all other candidates, then A must be elected. (from Arrow's impossibility theorem)
  • Majority criterion—If there exists a majority that ranks (or rates) a single candidate higher than all other candidates, does that candidate always win?
  • Monotonicity criterion—Is it impossible to cause a winning candidate to lose by ranking that candidate higher, or to cause a losing candidate to win by ranking that candidate lower?
  • Consistency criterion—If the electorate is divided in two and a choice wins in both parts, does it always win overall?
  • Participation criterion—Is voting honestly always better than not voting at all? (This is grouped with the distinct but similar Consistency Criterion in the table below.[a])
  • Condorcet criterion—If a candidate beats every other candidate in pairwise comparison, does that candidate always win? (This implies the majority criterion, above)
  • Condorcet loser criterion—If a candidate loses to every other candidate in pairwise comparison, does that candidate always lose?
  • Independence of irrelevant alternatives—Is the outcome the same after adding or removing non-winning candidates?
  • Independence of clones criterion—Is the outcome the same if candidates identical to existing candidates are added?
  • Reversal symmetry—If individual preferences of each voter are inverted, does the original winner never win?
Unrestricted domain Non-dictatorship Pareto efficiency Majority Monotone Consistency & Participation Condorcet Condorcet loser IIA Clone independence Reversal symmetry
Cardinal preferences Zero information, rational voters Yes Yes No[b] No Yes Yes No No No No Yes
Imperfect information, rational voters Yes Yes No No Yes Yes No No No No Yes
Strong Nash equilibrium (Perfect information, rational voters, and perfect strategy) Yes Yes Yes Yes Yes No Yes No[c] No Yes Yes
Absolute cutoff Yes No[d] Yes[e] No Yes Yes No No Yes[f] Yes Yes
Dichotomous preferences Rational voters No[g] Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Approval satisfies the mutual majority criterion and Smith criterion when voters' preferences are dichotomous; this is because the winner will be someone that the most voters prefer above all others, or that ties with other candidates but the group of tied candidates is preferred by more voters than any candidate not in the group.

See also[edit]

Some variants and generalizations of approval voting are:

Notes[edit]

  1. ^ Consistency implies participation, but not vice versa. For example, Score Voting complies with participation and consistency, but median ratings satisfies participation and fails consistency.
  2. ^ When the criterion is failed, the result is always a tie between the alternative preferred by all voters and one or more other alternatives. The criterion can only be failed when the tied candidates are approved on every ballot cast in the election.
  3. ^ The probability of failing this criterion vanishes asymptotically as the number of voters grows.
  4. ^ If voters are forced to determine their approval cutoff without knowing the available alternatives prior to an election, there can exist two alternatives for which one voter's preference determines the winner regardless of another voter's preference. For example, consider a cardinal scale from 0 to 1, with 0.5 as the cutoff. The criterion is personal wealth for voter A and quality of drinking water for voter B. There can exist two candidates, such that voter A's cardinal preferences are 0.49 and 0.51, while voter B's preferences are 0 and 0.49. Voter A's preferences, despite how trivial, determine the outcome of the election regardless of voter B's preferences, because voter B is forced to abstain, even while having a stronger preference.
  5. ^ Pareto efficiency is implied by, and is weaker than the combination of Monotonicity, IIA and Non-Imposition (that every possible societal preference order should be achievable by some set of individual preference orders, which is the case in all of these scenarios). These three conditions were in fact specified in the original statement of Arrow's impossibility theorem
  6. ^ The model assumes a voter has an immovable approval cutoff while also having meaningful cardinal preferences. When all available alternatives are either above or below the cutoff, the voter votes for all or none of the candidates, despite preferring some over others.
  7. ^ In a dichotomous preference society, voters do not have a preferred ordering for the alternatives, such as A>B>C. Each voter has a binary "yes" or "no" rating for any alternative, while having no degree of preference among alternatives with either rating.

References[edit]

  1. ^ Brams, Steven J.; Herschbach, Dudley R. (2001). "The Science of Elections". Science. 292 (5521): 1449. doi:10.1126/science.292.5521.1449. JSTOR 3083781. PMID 11379606. S2CID 28262658.
  2. ^ Laslier, Jean-François; Vander Straeten, Karine (April 2003). "Approval Voting: An Experiment during the French 2002 Presidential Election" (PDF). p. 6. Archived from the original (PDF) on May 7, 2005. Retrieved July 8, 2014.
  3. ^ Baujard, Antoinette; Igersheim, Herrade; Lebon, Isabelle; Gavrel, Frédéric; Laslier, Jean-François (2014-06-01). "Who's favored by evaluative voting? An experiment conducted during the 2012 French presidential election" (PDF). Electoral Studies. 34: 131–145. doi:10.1016/j.electstud.2013.11.003. Archived (PDF) from the original on 2022-10-09.
  4. ^ Nagel, J. H. (2007). "The Burr Dilemma in Approval Voting" (PDF). The Journal of Politics. 69 (1): 43–58. doi:10.1111/j.1468-2508.2007.00493.x. S2CID 154179804. Archived from the original (PDF) on 2007-06-21. Retrieved 2007-06-06.
  5. ^ Nagel, J. H. (2006). "A Strategic Problem in Approval Voting". Mathematics and Democracy. Studies in Choice and Welfare: 133–150. doi:10.1007/3-540-35605-3_10. ISBN 978-3-540-35603-5.
  6. ^ Brams, Steven J. (2008). Mathematics and Democracy: Designing Better Voting and Fair-Division Procedures. Princeton University Press. p. 16. ISBN 9780691133218.
  7. ^ a b c Brams, Steven J.; Fishburn, Peter C. (August 2003). Going from Theory to Practice: The Mixed Success of Approval Voting (PDF). Annual Meeting of the American Political Science Association. American Political Science Association. Archived from the original (PDF) on December 18, 2018. Retrieved May 8, 2010.
  8. ^ "Latvia - How to vote". European elections 2024: all you need to know. Retrieved 2024-03-28.
  9. ^ a b "Fargo, North Dakota, Measure 1, Approval Voting Initiative (November 2018)". Ballotpedia. November 7, 2018.
  10. ^ One of America's Most Famous Towns Becomes First in the Nation to Adopt Approval Voting Archived 2018-11-07 at the Wayback Machine, accessed November 7, 2018
  11. ^ Moen, Mike (June 10, 2020). "Fargo Becomes First U.S. City to Try Approval Voting". Public News Service. Retrieved December 3, 2020.
  12. ^ "St. Louis Voters Approve Nonpartisan Elections". U.S. News & World Report. November 4, 2020. Archived from the original on 2021-06-14. Retrieved December 3, 2020.
  13. ^ a b "St. Louis, Missouri, Proposition D, Approval Voting Initiative (November 2020)". Ballotpedia. November 4, 2020. Retrieved November 4, 2020.
  14. ^ a b Sclinkmann, Mark (November 4, 2020). "Overhaul of St. Louis election system passes, residency rule repeal fails". St. Louis Post-Dispatch. Retrieved November 4, 2020.
  15. ^ Brams, Steven J.; Fishburn, Peter C. (2007), Approval Voting, Springer-Verlag, p. xv, ISBN 978-0-387-49895-9
  16. ^ Brams, Steven; Fishburn, Peter (1978). "Approval Voting". American Political Science Review. 72 (3): 831–847. doi:10.2307/1955105. JSTOR 1955105. S2CID 251092061.
  17. ^ Colomer, Josep M.; McLean, Iain (1998). "Electing Popes: Approval Balloting and Qualified-Majority Rule". The Journal of Interdisciplinary History. 29 (1): 1–22. doi:10.1162/002219598551616. JSTOR 205972. S2CID 145296691.
  18. ^ Lines, Marji (1986). "Approval Voting and Strategy Analysis: A Venetian Example". Theory and Decision. 20 (2): 155–172. doi:10.1007/BF00135090. S2CID 121512308.
  19. ^ Mowbray, Miranda; Gollmann, Dieter (July 2007). Electing the Doge of Venice: analysis of a 13th Century protocol (PDF). IEEE Computer Security Foundations Symposium. Venice, Italy. Archived (PDF) from the original on 2022-10-09.
  20. ^ Brams, Steven J. (April 1, 2006). The Normative Turn in Public Choice (PDF) (Speech). Presidential Address to Public Choice Society. New Orleans, Louisiana. Archived from the original (PDF) on May 31, 2010. Retrieved May 8, 2010.
  21. ^ "The "Wisnumurti Guidelines" for Selecting a Candidate for Secretary-General" (PDF). Archived from the original (PDF) on February 27, 2008. Retrieved November 30, 2007.
  22. ^ Tharoor, Shashi (October 21, 2016). "The inside Story of How I Lost the Race for the UN Secretary-General's Job in 2006". OPEN Magazine. Archived from the original on July 21, 2019. Retrieved March 6, 2019.
  23. ^ Mavrogordatos, George Th. (1983). Stillborn Republic: Social Coalitions and Party Strategies in Greece 1922–1936. University of California Press. pp. 351–352.
  24. ^ Peralta, Sal (June 17, 2016). "Following tense primary, Independent Party plans presidential preference vote (OPINION)". The Oregonian. Retrieved June 26, 2018.
  25. ^ Radnovich, Connor (April 21, 2018). "Independent Party's internal conflict highlighted in Oregon governor race". Statesman Journal. Retrieved June 26, 2018.
  26. ^ Richie, Rob (December 14, 2016). "New Lessons from Problems with Approval Voting in Practice". FairVote.
  27. ^ "STAR VOTING ANNOUNCEMENT". Independent Party of Oregon. Salem. 2020-04-07. Retrieved 2020-04-11.
  28. ^ "Independent Party of Oregon to utilize STAR system for primary". Herald and News. Apr 8, 2020. Retrieved 2020-04-10.
  29. ^ Covich, Skylar. "Vice-Chair's Remarks". American Solidarity Party. Archived from the original on June 22, 2018. Retrieved June 21, 2018.
  30. ^ "Platform". Green Party of Texas. Retrieved January 31, 2017. We support switching to a preferential voting method, such as approval voting.
  31. ^ "By-Laws". Green Party of Texas. Archived from the original on January 29, 2017. Retrieved January 31, 2017. The Co-Chair, Treasurer, and Secretary positions shall be filled by using approval voting.
  32. ^ "Ohio Green Party Presidential Nominating Convention (Columbus)". Ohio Green Party. Archived from the original on February 26, 2021. Retrieved January 31, 2017. We have agreed to use "approval voting" as opposed to "instant runoff voting" to make the Ohio Green Party choice for president
  33. ^ "MEETING MINUTES LIBERTARIAN NATIONAL COMMITTEE" (PDF). October 4, 2020. Archived (PDF) from the original on 2022-10-09. VOTING METHOD: Approval Voting per OpaVote. Vote for as many candidates as desired.
  34. ^ "State Platform". Libertarian Party of Texas. Archived from the original on January 30, 2017. Retrieved January 31, 2017. We also believe that all races should be decided by Approval Voting
  35. ^ "Document:Colorado State Party Bylaws 2021". LPedia. Retrieved 2022-09-24. For any partisan offices, Convention Delegates shall vote by approval voting
  36. ^ "Colorado Convention 2018". LPedia. Retrieved 2022-09-24. All candidates were selected by approval voting via standing vote.
  37. ^ "Bylaws". Arizona Libertarian Party. Retrieved 2022-09-24. The remaining Delegates … shall be elected by approval voting … should there be more Delegate Candidates than allotted seats.
  38. ^ "Rules of the Libertarian Party" (PDF). Libertarian Party of New York. November 7, 2021. Archived (PDF) from the original on 2022-10-09. All elections shall be held with approval voting
  39. ^ "Platform". Modern Whig Action. Archived from the original on November 22, 2016. Retrieved January 1, 2017. The implementation of approval voting for all state and federal elections
  40. ^ "Grüne München: Satzung" [Statutes of the city association - Alliance 90/The Greens Munich-City District Association] (in German). 2017-01-18. Archived from the original on 2017-01-18. Retrieved 2023-03-05. Delegierte für Bundes, Landes- und Bezirksversammlungen werden per Zustimmungsblockwahl gewählt. Jede*r Stimmberechtigte hat so viele Stimmen, wie Bewerber*innen zur Wahl stehen, und kann jeder*m Bewerber*in eine oder keine Stimme geben.
  41. ^ "Jednací řád celostátního fóra". Pirati.CZ (in Czech). Retrieved 2021-11-16.
  42. ^ "Bundesparteitag 2010.1/Geschäftsordnung" (in German). German Pirate Party. Retrieved June 24, 2018.
  43. ^ "Election Data from the German Pirate Party (Piratenpartei)". The Center for Election Science. Archived from the original on 2019-02-19. Retrieved 2022-09-24.
  44. ^ Griffiths, Shawn M. (November 6, 2018). "One of America's Most Famous Towns Becomes First in the Nation to Adopt Approval Voting". Independent Voter News. Archived from the original on February 3, 2019. Retrieved November 7, 2018.
  45. ^ Piper, Kelsey (2018-11-15). "This city just approved a new election system never tried before in America". Vox. Retrieved 2020-07-08.
  46. ^ Amundson, Barry (Jun 9, 2020). "Strand and Preston emerge as leaders in Fargo City Commission race". INFORUM. Archived from the original on 2020-06-10. Retrieved 2020-07-08.
  47. ^ "Fargo's First Approval Voting Election: Results and Voter Experience". The Center for Election Science. 2020-06-17. Retrieved 2020-07-08.
  48. ^ Nagel, Jack H. (2007). "The Burr Dilemma in Approval Voting". The Journal of Politics. 69 (1): 43–58. doi:10.1111/j.1468-2508.2007.00493.x. ISSN 0022-3816. S2CID 154179804.
  49. ^ RCV for Colorado. "Approval Voting Case Study". Google Docs. Archived from the original on 2021-11-24. Retrieved 2021-03-04.
  50. ^ "Guest opinion: Emma Donahue and Linda S. Templin: Ballot issue 2E just makes sense - Ranked Choice Voting for Colorado". RCV for Colorado. Archived from the original on 2020-11-30. Retrieved 2021-03-04. Triton Polling called Fargo voters and found that a significant number had gamed that voting method by bullet voting, just like the experts said they would.
  51. ^ Hamlin, Aaron (2022-06-16). "Fargo's Second Approval Voting Election Runs Smoothly". The Center for Election Science. Retrieved 2022-07-06.
  52. ^ 42+39+32+31+26+25+22+21+17+16+11+8+7+6+5 = 308%
  53. ^ "March 2, 2021 Non-Partisan Primary Municipal Election". City of St. Louis Board of Election Commissioners. Archived from the original on 2020-11-20. Retrieved 2021-03-04.
  54. ^ "Election Summary Report Primary Municipal Election St. Louis, Missouri March 2, 2021" (PDF). 2021-03-10. Total Votes … 156.3% … 111.4% … 113.1% … 118.3% … 112.2% … 121.4% … 137.9% … 113.2%
  55. ^ Hu, Xingwei; Shapley, Lloyd S. (2003). "On Authority Distributions in Organizations". Games and Economic Behavior. 45 (1): 132–170. doi:10.1016/S0899-8256(03)00130-1.
  56. ^ "Statutes of the Society for Social Choice and Welfare" (PDF). Society for Social Choice and Welfare. Archived (PDF) from the original on 2022-10-09. Retrieved January 28, 2020.
  57. ^ "MAA Bylaws". Mathematical Association of America. August 7, 2010. Retrieved November 6, 2014.
  58. ^ "2015 American Mathematical Society Elections" (PDF). American Mathematical Society. Archived (PDF) from the original on 2022-10-09. Retrieved August 19, 2015.
  59. ^ "Constitution of the Institute for Operations Research and the Management Sciences" (PDF). Institute for Operations Research and the Management Sciences. August 2017. p. 7. Archived (PDF) from the original on 2022-10-09.
  60. ^ "Bylaws of the American Statistical Association" (PDF). American Statistical Association. September 19, 2018. Retrieved January 28, 2020.
  61. ^ Brams, Steven J.; Fishburn, Peter C. (2010). "Going from Theory to Practice: The Mixed Success of Approval Voting". In Laslier, Jean-François; Sanver, M. Remzi (eds.). Handbook on Approval Voting. Studies in Choice and Welfare. Springer Berlin Heidelberg. pp. 19–37. doi:10.1007/978-3-642-02839-7_3. ISBN 9783642028380.
  62. ^ a b Brams & Fishburn 1983, p. 29.
  63. ^ a b c Niemi, R. G. (1984). "The Problem of Strategic Behavior under Approval Voting". American Political Science Review. 78 (4): 952–958. doi:10.2307/1955800. JSTOR 1955800. S2CID 146976380.
  64. ^ Yilmaz, M. R. (1999). "Can we improve upon approval voting?". European Journal of Political Economy. 15 (1): 89–100. doi:10.1016/S0176-2680(98)00043-3.
  65. ^ Saari, Donald G.; Van Newenhizen, Jill (2004). "The problem of indeterminancy in approval, multiple, and truncated voting systems". Public Choice. 59 (2): 101–120. doi:10.1007/BF00054447. JSTOR 30024954. S2CID 154705078.
  66. ^ Saari, Donald G.; Van Newenhizen, Jill (2004). "Is approval voting an 'unmitigated evil?' A response to Brams, Fishburn, and Merrill". Public Choice. 59 (2): 133–147. doi:10.1007/BF00054449. JSTOR 30024956. S2CID 154007278.
  67. ^ Brams & Fishburn 1983, p. 31.
  68. ^ Brams & Fishburn 1983, p. 38.
  69. ^ Brams & Fishburn 1983, p. 16–17.
  70. ^ Brams, S. J.; Remzi Sanver, M. (2005). "Critical strategies under approval voting: Who gets ruled in and ruled out". Electoral Studies. 25 (2): 287–305. doi:10.1016/j.electstud.2005.05.007.
  71. ^ Myerson, R.; Weber, R. J. (1993). "A theory of Voting Equilibria" (PDF). American Political Science Review. 87 (1): 102–114. doi:10.2307/2938959. hdl:10419/221141. JSTOR 2938959. S2CID 143828854. Archived (PDF) from the original on 2022-10-09.
  72. ^ Dutta, B; De Sinopoli, F.; Laslier, J.-F. (2006). "Approval voting: three examples". International Journal of Game Theory. 35: 27–38. CiteSeerX 10.1.1.365.8090. doi:10.1007/s00182-006-0053-2. S2CID 801286.
  73. ^ Brams & Fishburn 1983, p. 85.
  74. ^ Laslier, J.-F. (2009). "The Leader rule: a model of strategic approval voting in a large electorate". Journal of Theoretical Politics. 21 (1): 113–136. doi:10.1177/0951629808097286. S2CID 153790214.
  75. ^ Brams & Fishburn 1983, p. 74, 81.
  76. ^ Laslier, J.-F. (2006) "Strategic approval voting in a large electorate," IDEP Working Papers No. 405 (Marseille, France: Institut D'Economie Publique)

Sources[edit]

External links[edit]