Single-molecule magnet

From Wikipedia, the free encyclopedia
Not to be confused with Molecule-based magnet.

A single-molecule magnet (SMM) is a metal-organic compound that has superparamagnetic behavior below a certain blocking temperature at the molecular scale. In this temperature range, an SMM exhibits magnetic hysteresis of purely molecular origin.[1][2] In contrast to conventional bulk magnets and molecule-based magnets, collective long-range magnetic ordering of magnetic moments is not necessary.[2]

Although the term "single-molecule magnet" was first employed in 1996,[3] the first single-molecule magnet, [Mn12O12(OAc)16(H2O)4] (nicknamed "Mn12") was reported in 1991.[4][5][6] This manganese oxide compound features a central Mn(IV)4O4 cube surrounded by a ring of 8 Mn(III) units connected through bridging oxo ligands, and displays slow magnetic relaxation behavior up to temperatures of ca. 4 K.[7][8]

Efforts in this field primarily focus on raising the operating temperatures of single-molecule magnets to liquid nitrogen temperature or room temperature in order to enable applications in magnetic memory. Along with raising the blocking temperature, efforts are being made to develop SMMs with high energy barriers to prevent fast spin reorientation.[9] Recent acceleration in this field of research has resulted in significant enhancements of single-molecule magnet operating temperatures to above 70 K.[10][11][12][13]

Measurement[edit]

Arrhenius behavior of magnetic relaxation[edit]

Because of single-molecule magnets' magnetic anisotropy, the magnetic moment has usually only two stable orientations antiparallel to each other, separated by an energy barrier. The stable orientations define the molecule's so called “easy axis”. At finite temperature, there is a finite probability for the magnetization to flip and reverse its direction. Identical to a superparamagnet, the mean time between two flips is called the Néel relaxation time and is given by the following Néel–Arrhenius equation:[14]

where:

  • τ is the magnetic relaxation time, or the average amount of time that it takes for the molecule's magnetization to randomly flip as a result of thermal fluctuations
  • τ0 is a length of time, characteristic of the material, called the attempt time or attempt period (its reciprocal is called the attempt frequency); its typical value is between 10−9 and 10−10 second
  • Ueff is the energy barrier associated with the magnetization moving from its initial easy axis direction, through a “hard plane”, to the other easy axis direction. The barrier Ueff is generally reported in cm−1 or in kelvins.
  • kB is the Boltzmann constant
  • T is the temperature

This magnetic relaxation time, τ, can be anywhere from a few nanoseconds to years or much longer.

Magnetic blocking temperature[edit]

The so-called magnetic blocking temperature, TB, is defined as the temperature below which the relaxation of the magnetization becomes slow compared to the time scale of a particular investigation technique.[15] Historically, the blocking temperature for single-molecule magnets has been defined as the temperature at which the molecule's magnetic relaxation time, τ, is 100 seconds. This definition is the current standard for comparison of single-molecule magnet properties, but otherwise is not technologically significant. There is typically a correlation between increasing an SMM's blocking temperature and energy barrier. The average blocking temperature for SMMs is 4K.[16] Dy-metallocenium salts are the most recent SMM to achieve the highest temperature of magnetic hysteresis, greater than that of liquid nitrogen.[9]

Intramolecular magnetic exchange[edit]

The magnetic coupling between the spins of the metal ions is mediated by superexchange interactions and can be described by the following isotropic Heisenberg Hamiltonian:

where is the coupling constant between spin i (operator ) and spin j (operator ). For positive J the coupling is called ferromagnetic (parallel alignment of spins) and for negative J the coupling is called antiferromagnetic (antiparallel alignment of spins): a high spin ground state, a high zero-field-splitting (due to high magnetic anisotropy), and negligible magnetic interaction between molecules.

The combination of these properties can lead to an energy barrier, so that at low temperatures the system can be trapped in one of the high-spin energy wells.[2][17][18][19][20]

Barrier to magnetic relaxation[edit]

A single-molecule magnet can have a positive or negative magnetic moment, and the energy barrier between these two states greatly determines the molecule's relaxation time. This barrier depends on the total spin of the molecule's ground state and on its magnetic anisotropy. The latter quantity can be studied with EPR spectroscopy.[21]

Performance[edit]

The performance of single-molecule magnets is typically defined by two parameters: the effective barrier to slow magnetic relaxation, Ueff, and the magnetic blocking temperature, TB. While these two variables are linked, only the latter variable, TB, directly reflects the performance of the single-molecule magnet in practical use. In contrast, Ueff, the thermal barrier to slow magnetic relaxation, only correlates to TB when the molecule's magnetic relaxation behavior is perfectly Arrhenius in nature.

The table below lists representative and record 100-s magnetic blocking temperatures and Ueff values that have been reported for single-molecule magnets.

Complex Type TB (100-s; K) Ueff (cm−1) Ref. Year Reported
[Mn12O12(OAc)16(H2O)4] cluster 3 K 42 cm−1 [5][4][6] 1991
[K(18-crown-6)(THF)2][{[(Me3Si)2N]2(THF)Tb}2(μ-η2:η2-N2)] cluster 14 K 227 cm−1 [22] 2011
Tb(CpiPr5)2 single-ion 52 K 1205 cm−1 [23] 2019
[Dy(Cpttt)2][B(C6F5)4]* single-ion 56 K 1219 cm−1 [10][11] 2017
[Dy(CpiPr4Me)2][B(C6F5)4] single-ion 62 K 1468 cm−1 [12] 2018
[tBuPO(NHiPr)2Dy(H2O)][I3] single-ion 2.4 K 452 cm−1 [24] 2016
[Dy(CpiPr4H)2][B(C6F5)4] single-ion 17 K 1285 cm−1 [12] 2018
[Dy(CpiPr5)(CpMe5)][B(C6F5)4] single-ion 67 K 1541 cm−1 [13] 2018
[Dy(CpiPr4Et)2][B(C6F5)4] single-ion 59 K 1380 cm−1 [12] 2018
[Dy(CpiPr5)2][B(C6F5)4] single-ion 56 K 1334 cm−1 [12] 2018
[Dy(OtBu)2(py)5][BPh4] single-ion 12 K 1264 cm−1 [25] 2016

Abbreviations: OAc=acetate, Cpttt=1,2,4‐tri(tert‐butyl)cyclopentadienide, CpMe5= 1,2,3,4,5-penta(methyl)cyclopentadienide, CpiPr4H= 1,2,3,4-tetra(isopropyl)cyclopentadienide, CpiPr4Me= 1,2,3,4-tetra(isopropyl)-5-(methyl)cyclopentadienide, CpiPr4Et= 1-(ethyl)-2,3,4,5-tetra(isopropyl)cyclopentadienide, CpiPr5= 1,2,3,4,5-penta(isopropyl)cyclopentadienide

*indicates parameters from magnetically dilute samples[26]

Types[edit]

Metal clusters[edit]

Ferritin

Metal clusters formed the basis of the first decade-plus of single-molecule magnet research, beginning with the archetype of single-molecule magnets, "Mn12".[4][5][6] This complex is a polymetallic manganese (Mn) complex having the formula [Mn12O12(OAc)16(H2O)4], where OAc stands for acetate. It has the remarkable property of showing an extremely slow relaxation of their magnetization below a blocking temperature. [Mn12O12(OAc)16(H2O)4]·4H2O·2AcOH, which is called "Mn12-acetate" is a common form of this used in research.[27]

Single-molecule magnets are also based on iron clusters[15] because they potentially have large spin states. In addition, the biomolecule ferritin is also considered a nanomagnet. In the cluster Fe8Br the cation Fe8 stands for [Fe8O2(OH)12(tacn)6]8+, with tacn representing 1,4,7-triazacyclononane.

The ferrous cube complex [Fe4(sae)4(MeOH)4] was the first example of a single-molecule magnet involving an Fe(II) cluster, and the core of this complex is a slightly distorted cube with Fe and O atoms on alternating corners.[28] Remarkably, this single-molecule magnet exhibits non-collinear magnetism, in which the atomic spin moments of the four Fe atoms point in opposite directions along two nearly perpendicular axes.[29] Theoretical computations showed that approximately two magnetic electrons are localized on each Fe atom, with the other atoms being nearly nonmagnetic, and the spin–orbit-coupling potential energy surface has three local energy minima with a magnetic anisotropy barrier just below 3 meV.[30]

Applications[edit]

One possible use of SMMs is superior magnetic thin films to coat hard disks.

There are many discovered types and potential uses.[31][32] Single-molecule magnets represent a molecular approach to nanomagnets (nanoscale magnetic particles).

Due to the typically large, bi-stable spin anisotropy, single-molecule magnets promise the realization of perhaps the smallest practical unit for magnetic memory, and thus are possible building blocks for a quantum computer.[1] Consequently, many groups have devoted great efforts into synthesis of additional single-molecule magnets. Single-molecule magnets have been considered as potential building blocks for quantum computers.[33] A single-molecule magnet is a system of many interacting spins with clearly defined low-lying energy levels. The high symmetry of the single-molecule magnet allows for a simplification of the spins that can be controllable in external magnetic fields. Single-molecule magnets display strong anisotropy, a property which allows a material to assume a variation of properties in different orientations. Anisotropy ensures that a collection of independent spins would be advantageous for quantum computing applications. A large amount of independent spins compared to a singular spin, permits the creation of a larger qubit and therefore a larger faculty of memory. Superposition and interference of the independent spins also allows for further simplification of classical computation algorithms and queries.

Theoretically, quantum computers can overcome the physical limitations presented by classical computers by encoding and decoding quantum states. Single-molecule magnets have been utilized for the Grover algorithm, a quantum search theory.[34] The quantum search problem typically requests for a specific element to be retrieved from an unordered database. Classically the element would be retrieved after N/2 attempts, however a quantum search utilizes superpositions of data in order to retrieve the element, theoretically reducing the search to a single query. Single molecular magnets are considered ideal for this function due to their cluster of independent spins. A study conducted by Leuenberger and Loss, specifically utilized crystals to amplify the moment of the single spin molecule magnets Mn12 and Fe8. Mn12 and Fe8 were both found to be ideal for memory storage with a retrieval time of approximately 10−10 seconds.[34]

Another approach to information storage with SMM Fe4 involves the application of a gate voltage for a state transition from neutral to anionic. Using electrically gated molecular magnets offers the advantage of control over the cluster of spins during a shortened time scale.[33] The electric field can be applied to the SMM using a tunneling microscope tip or a strip-line. The corresponding changes in conductance are unaffected by the magnetic states, proving that information storage could be performed at much higher temperatures than the blocking temperature.[16] The specific mode of information transfer includes DVD to another readable medium, as shown with Mn12 patterned molecules on polymers.[35]

Another application for SMMs is in magnetocaloric refrigerants . A machine learning approach using experimental data has been able to predict novel SMMs that would have large entropy changes, and therefore more suitable for magnetic refrigeration. Three hypothetical SMMs are proposed for experimental synthesis:, , .[36] The main SMM characteristics that contribute to the entropy properties include dimensionality and the coordinating ligands.

In addition, single-molecule magnets have provided physicists with useful test-beds for the study of quantum mechanics. Macroscopic quantum tunneling of the magnetization was first observed in Mn12O12, characterized by evenly spaced steps in the hysteresis curve.[37] The periodic quenching of this tunneling rate in the compound Fe8 has been observed and explained with geometric phases.[38]

See also[edit]

References[edit]

  1. ^ a b Christou, George; Gatteschi, Dante; Hendrickson, David N.; Sessoli, Roberta (2011). "Single-Molecule Magnets". MRS Bulletin. 25 (11): 66–71. doi:10.1557/mrs2000.226. ISSN 0883-7694.
  2. ^ a b c Introduction to Molecular Magnetism by Dr. Joris van Slageren.
  3. ^ Aubin, Sheila M. J.; Wemple, Michael W.; Adams, David M.; Tsai, Hui-Lien; Christou, George; Hendrickson, David N. (1996). "Distorted MnIVMnIII3Cubane Complexes as Single-Molecule Magnets". Journal of the American Chemical Society. 118 (33): 7746. doi:10.1021/ja960970f.
  4. ^ a b c Caneschi, Andrea; Gatteschi, Dante; Sessoli, Roberta; Barra, Anne Laure; Brunel, Louis Claude; Guillot, Maurice (1991). "Alternating current susceptibility, high field magnetization, and millimeter band EPR evidence for a ground S = 10 state in [Mn12O12(Ch3COO)16(H2O)4].2CH3COOH.4H2O". Journal of the American Chemical Society. 113 (15): 5873. doi:10.1021/ja00015a057.
  5. ^ a b c Sessoli, Roberta; Tsai, Hui Lien; Schake, Ann R.; Wang, Sheyi; Vincent, John B.; Folting, Kirsten; Gatteschi, Dante; Christou, George; Hendrickson, David N. (1993). "High-spin molecules: [Mn12O12(O2CR)16(H2O)4]". Journal of the American Chemical Society. 115 (5): 1804–1816. doi:10.1021/ja00058a027. ISSN 0002-7863.
  6. ^ a b c Sessoli, R.; Gatteschi, D.; Caneschi, A.; Novak, M. A. (1993). "Magnetic bistability in a metal-ion cluster". Nature. 365 (6442): 141–143. Bibcode:1993Natur.365..141S. doi:10.1038/365141a0. ISSN 0028-0836. S2CID 4235125.
  7. ^ Lis, T. (1980). "Preparation, structure, and magnetic properties of a dodecanuclear mixed-valence manganese carboxylate". Acta Crystallographica Section B. 36 (9): 2042. doi:10.1107/S0567740880007893.
  8. ^ Chemistry of Nanostructured Materials; Yang, P., Ed.; World Scientific Publishing: Hong Kong, 2003.
  9. ^ a b Spree, Lukas; Popov, Alexey A. (2019-02-26). "Recent advances in single molecule magnetism of dysprosium-metallofullerenes". Dalton Transactions. 48 (9): 2861–2871. doi:10.1039/C8DT05153D. ISSN 1477-9234. PMC 6394203. PMID 30756104.
  10. ^ a b Guo, Fu-Sheng; Day, Benjamin M.; Chen, Yan-Cong; Tong, Ming-Liang; Mansikkamäki, Akseli; Layfield, Richard A. (2017-09-11). "A Dysprosium Metallocene Single-Molecule Magnet Functioning at the Axial Limit". Angewandte Chemie International Edition. 56 (38): 11445–11449. doi:10.1002/anie.201705426. PMID 28586163.
  11. ^ a b Goodwin, Conrad A. P.; Ortu, Fabrizio; Reta, Daniel; Chilton, Nicholas F.; Mills, David P. (2017). "Molecular magnetic hysteresis at 60 kelvin in dysprosocenium" (PDF). Nature. 548 (7668): 439–442. Bibcode:2017Natur.548..439G. doi:10.1038/nature23447. ISSN 0028-0836. PMID 28836589. S2CID 4454501.
  12. ^ a b c d e Randall McClain, K.; Gould, Colin A.; Chakarawet, Khetpakorn; Teat, Simon J.; Groshens, Thomas J.; Long, Jeffrey R.; Harvey, Benjamin G. (2018). "High-temperature magnetic blocking and magneto-structural correlations in a series of dysprosium( iii ) metallocenium single-molecule magnets". Chemical Science. 9 (45): 8492–8503. doi:10.1039/C8SC03907K. ISSN 2041-6520. PMC 6256727. PMID 30568773.
  13. ^ a b Guo, Fu-Sheng; Day, Benjamin M.; Chen, Yan-Cong; Tong, Ming-Liang; Mansikkamäki, Akseli; Layfield, Richard A. (2018-12-21). "Magnetic hysteresis up to 80 kelvin in a dysprosium metallocene single-molecule magnet". Science. 362 (6421): 1400–1403. Bibcode:2018Sci...362.1400G. doi:10.1126/science.aav0652. ISSN 0036-8075. PMID 30337456.
  14. ^ Néel, L. (1949). "Théorie du traînage magnétique des ferromagnétiques en grains fins avec applications aux terres cuites". Ann. Géophys. 5: 99–136. (in French; an English translation is available in Kurti, N., ed. (1988). Selected Works of Louis Néel. Gordon and Breach. pp. 407–427. ISBN 978-2-88124-300-4.). [verification needed]
  15. ^ a b Gatteschi, Dante (2000). "Single-molecule magnets based on iron(iii) oxo clusters". Chemical Communications (9): 725–732. doi:10.1039/a908254i..
  16. ^ a b Hao, Hua; Zheng, XiaoHong; Jia, Ting; Zeng, Zhi (2015-06-18). "Room temperature memory device using single-molecule magnets". RSC Advances. 5 (67): 54667–54671. Bibcode:2015RSCAd...554667H. doi:10.1039/C5RA07774E. ISSN 2046-2069.
  17. ^ Frustrated Magnets Archived March 14, 2008, at the Wayback Machine, Leibniz Institute for Solid State and Materials Research, Dresden, Germany.
  18. ^ Molecular Magnetism Web Introduction page.
  19. ^ ScienceDaily (Mar. 27, 2000) article Several New Single-Molecule Magnets Discovered.
  20. ^ National Physical Laboratory (UK) Home > Science + Technology > Quantum Phenomena > Nanophysics > Research – article Molecular Magnets.
  21. ^ Cirera, Jordi; Ruiz, Eliseo; Alvarez, Santiago; Neese, Frank; Kortus, Jens (2009). "How to Build Molecules with Large Magnetic Anisotropy". Chemistry – A European Journal. 15 (16): 4078–4087. doi:10.1002/chem.200801608. ISSN 1521-3765. PMID 19248077.
  22. ^ Rinehart, Jeffrey D.; Fang, Ming; Evans, William J.; Long, Jeffrey R. (2011-09-14). "A N 2 3– Radical-Bridged Terbium Complex Exhibiting Magnetic Hysteresis at 14 K". Journal of the American Chemical Society. 133 (36): 14236–14239. doi:10.1021/ja206286h. ISSN 0002-7863. PMID 21838285. S2CID 207071708.
  23. ^ Gould, Colin. A; McClain, K. Randall; Yu, Jason M.; Groshens, Thomas J.; Furche, Fillip; Harvey, Benjamin G.; Long, Jeffrey R. (2019-08-02). "Synthesis and Magnetism of Neutral, Linear Metallocene Complexes of Terbium(II) and Dysprosium(II)". Journal of the American Chemical Society. 141 (33): 12967–12973. doi:10.1021/jacs.9b05816. PMID 31375028. S2CID 199388151.
  24. ^ Gupta, Sandeep K.; Rajeshkumar, Thayalan; Rajaraman, Gopalan; Murugavel, Ramaswamy (2016-07-26). "An air-stable Dy(III) single-ion magnet with high anisotropy barrier and blocking temperature". Chemical Science. 7 (8): 5181–5191. doi:10.1039/C6SC00279J. ISSN 2041-6539. PMC 6020529. PMID 30155168.
  25. ^ Ding, You-Song; Chilton, Nicholas F.; Winpenny, Richard E. P.; Zheng, Yan-Zhen (2016). "On Approaching the Limit of Molecular Magnetic Anisotropy: A Near-Perfect Pentagonal Bipyramidal Dysprosium(III) Single-Molecule Magnet". Angewandte Chemie International Edition. 55 (52): 16071–16074. doi:10.1002/anie.201609685. ISSN 1521-3773. PMID 27874236.
  26. ^ Giansiracusa, Marcus J.; Kostopoulos, Andreas K.; Collison, David; Winpenny, Richard E. P.; Chilton, Nicholas F. (2019-06-13). "Correlating blocking temperatures with relaxation mechanisms in monometallic single-molecule magnets with high energy barriers (Ueff > 600 K)". Chemical Communications. 55 (49): 7025–7028. doi:10.1039/C9CC02421B. ISSN 1364-548X. PMID 31066737. S2CID 147706997.
  27. ^ Yang, E; Harden, Nicholas; Wernsdorfer, Wolfgang; Zakharov, Lev; Brechin, Euan K.; Rheingold, Arnold L.; Christou, George; Hendrickson, David N. (2003). "Mn4 single-molecule magnets with a planar diamond core and S=9". Polyhedron. 22 (14–17): 1857. doi:10.1016/S0277-5387(03)00173-6.
  28. ^ Oshio, H.; Hoshino, N.; Ito, T. (2000). "Superparamagnetic Behavior in an Alkoxo-Bridged Iron(II) Cube". J. Am. Chem. Soc. 122 (50): 12602–12603. doi:10.1021/ja002889p.
  29. ^ Oshio, H.; Hoshino, N.; Ito, T.; Nakano, M. (2004). "Single-Molecule Magnets of Ferrous Cubes: Structurally Controlled Magnetic Anisotropy". J. Am. Chem. Soc. 126 (28): 8805–8812. doi:10.1021/ja0487933. PMID 15250734.
  30. ^ Manz, T. A.; Sholl, D. S. (2011). "Methods for Computing Accurate Atomic Spin Moments for Collinear and Noncollinear Magnetism in Periodic and Nonperiodic Materials". J. Chem. Theory Comput. 7 (12): 4146–4164. doi:10.1021/ct200539n. PMID 26598359.
  31. ^ Cavallini, Massimiliano; Facchini, Massimo; Albonetti, Cristiano; Biscarini, Fabio (2008). "Single molecule magnets: from thin films to nano-patterns". Physical Chemistry Chemical Physics. 10 (6): 784–93. Bibcode:2008PCCP...10..784C. doi:10.1039/b711677b. hdl:11380/963240. PMID 18231680.
  32. ^ Beautiful new single molecule magnets, 26 March 2008 – summary of the article Milios, Constantinos J.; Piligkos, Stergios; Brechin, Euan K. (2008). "Ground state spin-switching via targeted structural distortion: twisted single-molecule magnets from derivatised salicylaldoximes". Dalton Transactions (14): 1809–17. doi:10.1039/b716355j. PMID 18369484.
  33. ^ a b Stepanenko, Dimitrije; Trif, Mircea; Loss, Daniel (2008-10-01). "Quantum computing with molecular magnets". Inorganica Chimica Acta. Protagonists in Chemistry: Dante Gatteschi (Part II ). 361 (14): 3740–3745. arXiv:cond-mat/0011415. doi:10.1016/j.ica.2008.02.066. ISSN 0020-1693.
  34. ^ a b Leuenberger, Michael N.; Loss, Daniel (2001-04-12). "Quantum computing in molecular magnets". Nature. 410 (6830): 789–793. arXiv:cond-mat/0011415. Bibcode:2001Natur.410..789L. doi:10.1038/35071024. ISSN 1476-4687. PMID 11298441. S2CID 4373008.
  35. ^ Cavallini, Massimiliano; Gomez‐Segura, Jordi; Ruiz‐Molina, Daniel; Massi, Massimiliano; Albonetti, Cristiano; Rovira, Concepció; Veciana, Jaume; Biscarini, Fabio (2005). "Magnetic Information Storage on Polymers by Using Patterned Single-Molecule Magnets". Angewandte Chemie. 117 (6): 910–914. Bibcode:2005AngCh.117..910C. doi:10.1002/ange.200461554. ISSN 1521-3757.
  36. ^ Holleis, Ludwig; Shivaram, B. S.; Balachandran, Prasanna V. (2019-06-03). "Machine learning guided design of single-molecule magnets for magnetocaloric applications". Applied Physics Letters. 114 (22): 222404. Bibcode:2019ApPhL.114v2404H. doi:10.1063/1.5094553. ISSN 0003-6951. S2CID 197477060.
  37. ^ Gatteschi, Dante; Sessoli, Roberta (2003-01-20). "Quantum Tunneling of Magnetization and Related Phenomena in Molecular Materials". Angewandte Chemie International Edition. 42 (3): 268–297. doi:10.1002/anie.200390099. PMID 12548682.
  38. ^ Wernsdorfer, W. (1999-04-02). "Quantum Phase Interference and Parity Effects in Magnetic Molecular Clusters". Science. 284 (5411): 133–135. Bibcode:1999Sci...284..133W. doi:10.1126/science.284.5411.133. PMID 10102810.

External links[edit]

Retrieved from "https://en.wikipedia.org/w/index.php?title=Single-molecule_magnet&oldid=1194553089"